BZHSG - GAGEKOTE 2 PROTECTIVE COATING

  • MSDS: BZHSG
  • Manufacturer: JP TECHNOLOGIES INC
  • Product Name: GAGEKOTE 2 PROTECTIVE COATING
  • National Stock Number: 8010-00N065974
Product Identification

Product ID:GAGEKOTE 2 PROTECTIVE COATING
MSDS Date:01/26/1995
FSC:8010
NIIN:00N065974
MSDS Number: BZHSG

Responsible Party
JP TECHNOLOGIES INC
1430 COOLEY COURT
SAN BERNARDINO, CA 92408
US

Emergency Phone: 800-535-5053

Info Phone: 909-799-8000

Cage: JO205

Contractor
JP TECHNOLOGIES INC
UPLAND, CA 91786 US

Telephone: 909-946-1000

Cage: JO205

Ingredients

2-BUTANONE; (METHYL ETHYL KETONE) (SARA 313) (CERCLA)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 85%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM; 300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CARBON TETRACHLORIDE (SARA 313) (CERCLA)

CAS: 56-23-5

RTECS: FG4900000

Fraction By Weight: 1%

OSHA PEL 10 PPM

ACGIH TLV: 5 PPM; 10 STEL, S

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


PHENOL (SARA 302/313) (CERCLA)

CAS: 108-95-2

RTECS: SJ3325000

Fraction By Weight: 1-5%

OSHA PEL 5 PPM, S

ACGIH TLV: 5 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ACRYLONITRILE BUTADIENE POLYMER; (NITRILE BUTADIENE RUBBER)

CAS: 9003-18-3

Fraction By Weight: 8%

OSHA PEL N/K

ACGIH TLV: N/K


PHENOL FORMALDEHYDE RESIN; (PHENOL RESIN)

CAS: 9003-35-4

Fraction By Weight: 1%

OSHA PEL N/K

ACGIH TLV: N/K


PARLON S; (CHLORINATED NATURAL RUBBER)

CAS: 68441-58-7

Fraction By Weight: 5%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTACT WITH SKIN MAY CAUSE MILD
IRRITATION, DRYING, CRACKING OR DERMATITIS. MAY CAUSE NAUSEA,
CRAMPS, HEADACHES, NOSE AND THROAT IRRITATION OR CORNEAL CLOUDING.
CHRONIC: OVEREXPOSURE TO SOLVENTS MAY CAUSE LIVER AND KIDNEY
DAMAGE. EMBRYO/FETOTOXIC EFFECTS HAVE BEEN OBSERVED IN LABORATORY
RATS EXPOSED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: TO OVER 1000 PPM METHYL ETHYL KETONE
FOR MOST OF GESTATION PERIOD.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:WASH W/PLENTY OF WATER FOR AT LEAST 15 MIN, LIFTING
LOWER & UPPER EYELIDS OCCAS. GET MED ATTN IMMED. SKIN:REMOVE ANY
CONTAMD CLTHG. WASH SKIN W/SOAP OR MILD DETERGENT & WATER FOR AT
LEAST 15 MIN. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF
RESP. IF BRTHG IS DFCLT, GIVE O*2. INGEST:INDUCE VOMIT ONLY BY
INSTRUCTION OF MD. NEVER GIVE ANYTHING BY MOUTH TO UNCON PERSON.
GET MED ATTN IMMED.

Fire Fighting

Flash Point:20.0F,-6.7C
Lower Limits:2.0%
Upper Limits:10.0%
Extinguishing Media:DRY CHEMICAL, ALCOHOL FOAM, WATER FOG OR CARBON
DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPORS CAN FLOW ALONG SURFACES TO A
DISTANT IGNITION SOURCE AND CAUSE FLASH BACK. CONTACT WITH STRONG
OXIDIZERS MAY CAUSE FIRE OR EXPLOSION.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AREA
OF LEAK OR SPILL. ABSORB MATERIAL WITH VERMICULITE, DRY SAND, EARTH
OR SIMILAR MATERIAL FOR DISPOSAL AS HAZARDOUS WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
LOCATION, AWAY FROM ANY AREA WHERE FIRE HAZARD MAY BE ACUTE.
Other Precautions:STORE AWAY FROM OXIDIZING MATERIALS. CONTAINERS
SHOULD BE BONDED AND GROUNDED FOR TRANSFERS TO AVOID STATIC SPARKS.
USE NON-SPARKING TYPE TOOLS AND EQUIPMENT.

Exposure Controls

Respiratory Protection:IF TLV IS EXCEEDED USE A NIOSH/MSHA APPROVED
ORGANIC RESPIRATOR.
Ventilation:LOCAL EXHAUST.
Protective Gloves:CHEMICAL IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
BOOTS, GLOVES, LAB COATS, APRON OR COVERALLS.
Work Hygienic Practices:WASH HANDS BEFORE EATING. KEEP WORK AREA CLEAN.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:175F,79C
Vapor Pres:70.6
Vapor Density:2.5
Spec Gravity:0.839 (H*2O=1)
VOC Pounds/Gallon:695
Evaporation Rate & Reference:4.6 (BUTYL ACETATE=1)
Solubility in Water:MODERATE
Appearance and Odor:TAN, SLIGHTLY VISCOUS LIQUID WITH METHYL ETHYL
KETONE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
HEAT, FLAMES AND STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND SUNLIGHT CAN CONTRIBUTE TO
INSTABILITY.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
SMOKE, ALIPHATICS AND OTHERS MAY BE RELEASED IN A FIRE.

Disposal

Waste Disposal Methods:ENSURE COMPLIANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.